Created with a focus on design.| performance. | quality.

Started in early 2020, Pacific Flying Machines was created to make FPV products that not only cater to modern trends, but also pushes the designs to a new level.

PFM is also committed to growing the FPV community through our Pilot programs and events.





Latest

Products

Enzo Motors

Introducing the new Enzo motors. Whether it’s freestyle or pure racing, these 6s motors will satisfy your FPV needs.

Enzo motors comes in two versions, the Enzo Standard and the Enzo Titanium. The Enzo standard edition is more focused on durability by having a thicker, taller bell. The standard motors also come with a steel propeller shaft. The Enzo titanium expands on the standard series by using a shorter titanium propeller shaft and a lighter bell and base design.

Enzo Standard Edition
Model: Enzo 4-6s Brushless Motor
KV: 1900KV
Stator length: 22mm
Stator height: 7mm
Input Voltage: 4-6s
Configuration: 12N14P
Shaft Diameter: 5mm
Weight: 36.9g with 150mm 20 gauge wires
Idle Current(10V): 1.0A

Enzo 2207 1900kv
HQ 51433 , Temperature 75.3C
PWMVIPWTE
5025.458.4213.785622.63
6025.9212.27317.918032.53
8024.7921.20525.5913572.58
9024.3027.27662.5415732.37
10023.8026.73636.3815422.42

Enzo Titanium Edition
Model: Enzo Ti 4-6s Brushless Motor
KV: 1900KV
Stator length: 22mm
Stator height: 7mm
Input Voltage: 4-6s
Configuration: 12N14P
Shaft Diameter: 5mm
Weight: 33..9g with 150mm 20 gauge wires
Idle Current(10V): 1.0A

Enzo 2207 Ti 1900kv
HQ 51433 , Temperature 75.3C
PWMVIPWTE
5024.718.53210.865762.73
6024.5512.27301.098192.72
8024.4915.87399.4613492.58
9024.4127.20663.9015552.34
10024.0026.73641.5115262.38

Hayabusa Race Frame

Besides being lightweight and balanced the Hayabusa design focused on 4 main drivers.

Configurability – Can support different racer preferences as well the latest trend in components.

Maintainability – Not just at home, but also at the race pits and fields, the frame should be easy to swap out parts or work on.

Durability – Race frames needs to be light, but they shouldn’t sacrifice durability for it. The Hayabusa needs to withstand punishing practices and provide confidence during races.

Longevity – Keep a longer product cycle with periodic design refreshes. Holes and mount patterns will remain constant so all parts will be backward compatible.


The end result is a podium getter that can hold up to hard lap after lap, race after race, season after season…

Specs:

  • Length: 222mm motor to motor
  • Configuration: 49° Slight Stretch-X
  • Weight: 75 grams
  • Carbon: 3K Carbon weave top and bottom layer with unidirectional inner layers.
  • Hardware:
    • 12.9 Grade steel bolts
    • Oversized 6061 Aluminum standoff
    • 7075 Aluminum Ring bolt set

Features:

Cam Plates– Support both Nano-size or Micro-size Camera plates
Top Plate– Slot for TPU Fins.
– 20×20 M2 screen holes for VTX mounting underside
– Zip-tie mounts for no TPU Antenna mounting
Bottom Plate– Single or double lipo strap with separated slots to avoid overlapping.
Center Spine– A brace between all four arms to stiffen and spread impacts across the frame.
Arms– Common arm design can be used in the front, back, left or right
– Reduce weak sections by using inlays instead of hole cuts to save weight.
Aluminum Ring Bolt– A larger bolt requires less carbon overall and provides a more secure bracing of the plates.
– The bolts also act as an impact absorber for the arms, helping to spread the impact to the other plates
VTX/RX holder– Can be used with 20×20 or 30.5×30.5 to keep smaller boards off the flight controller.

TPU Parts:

Instructions:

Build sheets can be found here: